Professional digital firing system "BROCART"
ADDITIONAL DEVICES
BFD24 - the multi-function device which plays an important role in the "Brocart" Firing System. Actually this device of providing with power supply (24V) of BFM24B and BFM24C modules and transfer of control signals to them from the Master BFC or a PyroPlayer BFP in RS485 network.
BFD24 is power source 24V of the executive modules which do not have internal batteries and the distributor of the RS485 network.
It Provides:
-
connection to the device up to 30 firingmodules BFM24B and BFM24C by means of universal cable AC4 and providing them with power supply 24V;
-
connection to the device of the 2-wire cable NC2 of network RS485 and transfer of a digital control signal on firing modules on universal cable AC4;
-
two operation modes:
- "Test" for check of network functioning and the connected firing modules;
- "Fire" for run fireworks
Composition:
-
inclusion toggle-switch;
-
"Test-Fire" mode switch
-
terrminals for connection of the 2-wire network cable NC2;
-
the GX16 4pin (IN) connector for connection to the device the RS485 network on universal cable AC4;
-
the GX16 4pin (OUT) connector for connection to the device of firing modules on universal cable AC4, providing them with power supply (24V) and transfer of digital control signals to them by RS485 network;
-
power source 24V - 2 x 12V, 7Ah batteries;
-
the digital indicator of the consumed current and tension of joint stock bank;
-
built-in charger;
-
dimensions: 300х200х170
-
weight - 10кг
MANUAL CONTROL
The recommended total length of AC4 cables from BFD24 to the last BFM24 firing module should be no more than 300 m.
The recommended total length of AC4 cables from BFD24 to the last BFM24 firing module should be no more than 300 m.
Total length of network from the Master BFC to the last BFM24 firing module should be no more than 1200 m.
Any configuration of "Brocart" Firing System can be made wireless with adding of wireless radio modems of BFW. The maximum distance between radio modems of 1 km
The recommended total length of AC4 cables from BFD24 to the last BFM24 firing module should be no more than 300 m.
The recommended total length of AC4 cables from BFD24 to the last BFM24 firing module should be no more than 300 m.
